The increased use of PLCs in industry has induced a reduction of the power needed to control a contactor.
The 2.4 / 3W consumption of AL9 to AL16 and 3.5W of the AL26 to AL40 allows a direct control by all PLC transistor outputs without the use of an interface relay. When operated from a battery, this low consumption gives a greatly increased battery life.
TAL contactors and TNL contactor relays completes the range with large voltage coil. These products are perfectly adapted to the railway application.
Attractive Characteristics
- Low consumption contactors with DC coil
- Control of power circuits from 4kW (AL9) to 18.5kW (AL40) at a voltage up to 690V 50 Hz and 440V DC
- A large utilization flexibility as they can be mounted in non-standard positions
- An insulation voltage of 1000V for the entire range
- Conformity to International standards
- Several cable connexion possible : classic clamp or cage connector, ring tongue terminals
Applications
Many applications are possible : all applications controlled by PLC, machines, robots, elevators, railway...